Large parts of Australia are mapped as bushfire prone, including plenty of suburban fringes. If your home is in one of them, the decking you choose isn’t just a style decision. It can affect your building approval and how your home copes with embers and radiant heat. This guide explains how BAL ratings work and what to look for in fire-rated composite decking.
What is a BAL rating?
A Bushfire Attack Level (BAL) measures how severely a building could be exposed to ember attack, radiant heat and direct flame in a bushfire. It’s set out in Australian Standard AS 3959, and it’s based on things like the vegetation around you, the slope of the land and how far the building is from the bush.
There are six levels:
| BAL | Risk | What it means |
|---|---|---|
| BAL-LOW | Very low | No special construction requirements |
| BAL-12.5 | Low | Mainly ember attack |
| BAL-19 | Moderate | Ember attack plus some radiant heat |
| BAL-29 | High | Increased ember attack and radiant heat |
| BAL-40 | Very high | Heat flux high enough that flame contact is likely |
| BAL-FZ | Extreme (Flame Zone) | Direct exposure to flames |
Your BAL is assessed for your specific site, usually by a bushfire consultant or as part of your planning and building approval.
Is composite decking flammable?
Every decking material except metal and masonry will burn if it’s exposed to enough heat for long enough. That includes timber and composite. “Fire-rated” or “BAL-rated” decking doesn’t mean fireproof. It means the product has been tested and shown to meet the requirements for a particular BAL when it’s installed the way it was tested.
That’s why the installation details on a certificate matter as much as the rating itself.
What does BAL-29 decking mean?
A BAL-29 rating means the decking has been tested and assessed as suitable for use on homes rated up to and including BAL-29. Both WoodEvo decking ranges carry this rating, and both are backed by CodeMark certification:
- HOME (WPC) is certified for use as decking in bushfire-prone areas up to and including BAL-29.
- ADVANCED (PVC) is certified up to and including BAL-29 when installed as tested. That means an enclosed subfloor as described in AS 3959, with the deck abutting a wall that is itself BAL-29 compliant.
Neither range is rated for BAL-40 or BAL-FZ sites. If your home is rated above BAL-29, you’ll need materials specifically approved for that level.
Your building surveyor will want to see the certificate, so we publish the reports and certificates on our Guides & Resources page.
How to check your bushfire risk
- Look up your address on our bushfire prone area map. It shows whether your property is in a mapped bushfire-prone area.
- Get your site’s BAL assessed. Being in a mapped area doesn’t tell you your BAL. That depends on your exact site.
- Choose materials to match your BAL, and give your builder or certifier the product certificates early.
Fire-safety tips for any deck
- Keep the area under and around the deck clear of leaves, bark and stored timber, especially before summer.
- Don’t store fuel like firewood, gas bottles or mulch against or under the deck.
- Use a heat barrier under BBQs (ceramic or fibre cement), and keep fire pits and heaters off the boards. Strong heat sources can damage composite, and heat damage isn’t covered by warranty.
- Watch for reflected sunlight. Energy-efficient windows can focus sunlight onto a deck and damage the surface, so consider this when planning.
- Follow the certified installation details. For a BAL-rated deck, how the subfloor is enclosed and what the deck abuts are part of the rating.
Composite or timber in bushfire areas?
Timber species vary a lot in how they handle fire, and AS 3959 limits which timbers can be used at each BAL. Composite gives you a tested, certified option with known limits, plus the low maintenance that makes it popular in the first place. For most BAL-29-and-under homes, a certified composite deck is a practical choice.
Talk to us
Building in a bushfire-prone area and not sure what applies? Contact our team with your BAL assessment and we’ll help you choose between HOME and ADVANCED, or point you to the right documents for your certifier.
Frequently asked questions
Is composite decking fire resistant?
No decking is fireproof, but some composite boards are tested and certified for bushfire-prone areas. Both WoodEvo ranges are certified up to and including BAL-29.
What BAL rating do I need for my deck?
Your deck needs to suit your home’s assessed BAL. Check your address on our bushfire map, then confirm your BAL with a bushfire consultant or your building surveyor.
Can I use composite decking in a BAL-40 or Flame Zone area?
WoodEvo decking is certified up to BAL-29 only. Higher BAL sites need materials specifically approved for those levels.
Does a BBQ damage composite decking?
It can. Place a ceramic or fibre cement barrier under BBQs and grills, and never put fire pits or heaters directly on the boards.
See WoodEvo for yourself
Order free samples, or get matched with an accredited installer near you.